17 Reasons Not To Be Ignoring Double Glazing Window Repairs

Double Glazing Window Repairs

The  double glazing window repairs  done will keep them working well, and save you money on heating costs. A professional will employ specific tools and will know how to complete the task right.

They'll also be able to give advice on the most current technology for energy efficiency. A lot of new double-glazed windows are covered by a guarantee of 10 or 20 years, but some offer lifetime warranties.

Broken Panes

Double-glazing cracks are not only unsightly, they also serve as a barrier to cold and heat to enter or leave your home. The good news is, most broken panes are repairable without replacing the entire window. The first step is to tape the cracked area with masking tape, stretching it past the glass's edges on both sides to stop the crack from expanding further. It's also a good idea to cover the crack with plastic, like a tarp or garbage bag, to keep the rain, bugs and animals out.

Then, you can remove the glass pane from its frame with an utility knife and a pair gloves. It's better to remove the glass in one piece than breaking it into tiny shards. It's also important to be cautious because any broken pieces may fall and break more. Finally, it's essential to recycle the old glass properly.

After you've removed the old window, you'll be required to measure the opening of the new pane. Be sure to take your measurements carefully and bear in mind that wood expands and expands or contracts over time. To ensure that the new window will fit perfectly it is recommended to subtract between 1/16 and 1/8 inch from each side of the measurement. Then, have a piece double-strength glass cut to these precise dimensions, and buy enough glazier's points or clips to be placed every 6 inches around the edges of the windowpane.

A professional will drill a set of holes in the window to remove any moisture, and then apply a special sealant to the gap. This will create an impermeable barrier that will keep your home warm and dry. The process can take from just a few hours to a few days, and it's important to let the sealant dry before moving on.

Although some double-pane windows can be repaired with this method, it's generally recommended that you replace the window if you're experiencing condensation, draughts or other problems that can't be solved by drilling or taping. It's also not a great idea for beginners to attempt the repair themselves, since special tools are required to complete the repair properly.

Condensation

Condensation can be a problem when the humidity or temperature of a space changes. It causes water droplets to form on cold surfaces and can get trapped between double-glazing if the seal isn't working. The good news is that it's rarely a big deal, and there are some options to try before calling an expert window repair specialist.

Make use of a hairdryer with low temperatures and at a safe distance to evaporate any moisture that is trapped between your windows. This is a temporary solution that won't stop the condensation from returning in the event that the cause of the issue is fixed. The most permanent solution is to ensure that you have enough ventilation inside your home and you maintain a balance between humidity levels. This will save you money on energy bills and help reduce the risk of mould and damp forming around your windows.

Another method to combat condensation is to make use of a defogger device. A small hole is cut in the double glazing and then a cleaner solution sprayed into it. This is a way to remove moisture from the air. This is a temporary measure and doesn't guarantee to eliminate condensation in the long-term but it could be an economical alternative until you can get your window repaired professionally.

Visible condensation is an essential indication that the sealant between the double pane windows has failed. If you notice this it's important to contact your double glazing company as soon as possible and have any problems put in writing. This will help if you need to make use of your warranty later on.

It's also worth oiling any mechanisms, hinges or handles on your double glazing to see if it can help. You can also try a dry, clean cloth to wipe off any haze that could be present, but keep in mind that this will not solve the root issue - the lack of a clean and dry space between your windows. If you're unable to solve this issue, it may be necessary to replace your window.

Draughts

Nothing is more annoying than a cold breeze coming through your double-glazed. It could make your entire home feel cold, even though the rest of your house is warm. The good news is that most draughts can be easy to fix and could save you a significant amount of money on your energy bills.

A draught typically originates from gaps around doors and windows. Poorly fitted plaster, loose, rotting timber, and even loose paintwork can create draughts. Draught proofing is one of the cheapest ways to save on your energy bills. It stops warm air from leaving your home in winter, and cold air from entering during summer, which means you don't have to keep heating your home at a high temperature.

The best way to stop draughts is to fit draught proofing strips. They are available in a variety of materials such as brush, foam or rubber strips and can be positioned around the bottom of the door or on the sides or the top of the frame. You can also get draught proofing for sash and casement windows. You can add brushes to sliding sash window and rubber strips to casement windows.

You can also use a draught-excluder between your floorboards. This will stop warm air rising and causing a draft. However, this is only effective if the floorboards aren't carpeted. You can also add an air vent cover for an open fire, even if it's not being used and seal the gaps under sinks, around extractor fans in chimneys, and in any other vents that aren't being used within your home.

Misted double glazing is a common issue that is easily fixable by creating a new seal. Many double glazing companies provide to drill misted glass units and install plugs, however this is typically a temporary solution. It is better to contact the company that sold and installed your double glazing and request that they repair the glass unit. It might cost a bit more however it is much cheaper than replacing the entire window.

Mist

Condensation in the panes of double-glazed windows can cause mist. The sealant that holds the glass together prevents the moisture from escaping, however it can be damaged or worn out by accidental collisions or due to the aging process and weathering. It is essential to get this repaired quickly because it could cause various issues for homeowners, ranging from damp and mould to excessive energy bills.

There is a simple and quick solution to this issue without replacing the entire window. Making a few tiny holes in the window allows you to put in a desiccant pack that will take in any condensation. This will solve the problem and keep your windows sparkling clean.

If you don't want to go to the trouble of drilling holes into your double glazed units, there are companies who will complete the task for you. This is costly and requires some experience and skills to be successful.

In some instances, it might be necessary for the window to be replaced in the event of serious damage, such as severe rot or cracks. This is particularly the case when you want to upgrade to a Low E-rated A-rated glass for improved insulation and a reduction in your heating expenses.

It is recommended to contact the company that installed your double glazing. If the window is covered by warranty, they might be able repair it or offer you an opportunity to purchase a replacement at a discounted price. For more general maintenance and care of your double glazed windows, it's worth regularly checking the mechanisms, hinges, handles, and any areas where the windows or doors enter the frame for signs of wear and tear. Cleaning your double glazing will also help reduce any issues with condensation and moisture in between the panes. If you're having trouble opening or closing your windows, you can lubricate the hinges and mechanisms with some grease or oil.